Amico Auto Car Bear Decor Soft Ivory Flannel Shift Knob Handle Reviews

Customer Ratings:

The bear is so cute. I like it very much. They are very easy to put on in my car. Now I enjoy driving very much.

Click Here For Most Helpful Customer Reviews >>

Well...Let's say this cover set doesn't entirely work on my car, but I still kept it since it's very cute. And I'm a bear person...BUT, for other Audi A6 owners, the shift knob cover doesn't fit. The hand brake cover works all right, not so perfect. So if it would bother you a lot, then you should probably not consider buying this cover set. And as other reviewers mentioned, the bears are glued to the the cover. So it is likely that they would fall off eventually. I'm prepared for such invent...and I have my needles ready. LOL.

Best Deals for Amico Auto Car Bear Decor Soft Ivory Flannel Shift Knob Handle

They are glued on and if you have a car that gets hot in the summer the bears fall off. I fixed them but sewing them back on but that is something i shouldn't have to do.

Honest reviews on Amico Auto Car Bear Decor Soft Ivory Flannel Shift Knob Handle

I love these so very much and they bring smiles on people whoever look inside of my car. the amazon price was the best of all the other sellers on the internet including ebay. Totally worth the money and I'm happy with the purchase.

Buy KYB SM5382 Strut Mount Kit

Customer Ratings:

The product is just fine but the image shows this to be a strut mount for the front. The picture is incorrect as part number SM5382 is just a small rubber mount and a spacer for the rear struts.

This was no problem for me as I knew what I was getting and the quality of the parts is top notch, but it would be easy for someone to mistake this for the (much) more expensive mount for the front because of the image.

Click Here For Most Helpful Customer Reviews >>

Arrived fast

Fit perfectly on aftermarket coilover.

Very satisfied.

Bellows in photo not included. Read desciptions and don't be fooled.

Best Deals for KYB SM5382 Strut Mount Kit

I expected a mount and boot to arrive, what arrived was bushings and a washer for the rear shocks. I did not research on this and Amazon again has the wrong picture depicting the item part number....

Review of R/T Dual 12-Inch Nissan Titan Crew/King Cab 04 -12 Sealed Speaker

Customer Ratings:

With space limited in a pickup I went with 2 12 inch Kicker Comp vt. This box almost meets the cubic footage requirements for a sealed enclosure (don't bother with a vented enclosure with a pickup). I had a bit of poly fill added and this thing rocks. I rock anything from Tool to JayZ to classical, an it hits the full frequency spectrum. This setup is perfect for the Titan Crew Cab. I saw some pictures of other people's Titan boxes and I thought it would stick out from under the seat but it doesn't. It really is a great fit. The box is solid construction with a good carpet job. Price was excellent. I spent $75U.S. with shipping. I highly recommend this box.

Click Here For Most Helpful Customer Reviews >>

Great fit, great price, fast shipping. arrived slightly damaged. but other than that I love it nice heavy construction with minimal sliding

Best iSimple HDRT Peripheral HD Radio Tuner Add-On for PXAMG Interface Deals

Customer Ratings:
List Price: $99.95
Sale Price: $73.62
Today's Bonus: 26% Off

Edited 2 years later...

This product is flashy in the box, but it has several glitches that keep it from truly shining.

1 (A+)Easy installation with an intuitive wiring layout. They include the wiring harness for both Acura and Honda makes, and a return box so that you can easily recycle the wiring harness you don't use. Yeah for green thumbs!

2 (C)This unit requires that you have a pass through device such as their unit, the Peripheral PXAMG Universal iPod Adapter. The unit would be MUCH better as an ALL-IN-ONE Aux/Ipod/HD radio input. Making room for both units in your car is somewhat difficult at times. In fact I would go one better and incorporate a switch for the antenna input so that you can use your car antenna with both the OEM radio tuner, or the HD tuner (with this device you un-hook from the OEM radio making all antenna inputs go through the HD tuner). I will explain in depth shortly.

3 (D)The printed instructions are INACCURATE/INCOMPLETE. upon completing install I attempted to use the unit and thought for certain that it was broken. Fiddling with my radio I stumbled upon the correct manner to start the HD tuner/Aux input selector. A couple times practicing it and now I find it easy. For my car the correct method is to change from sat/cd input to FM/AM, then change back to sat/cd; following this you must (within 4 seconds) press the seek forward/backward button and hold it for 5 seconds. This causes the menu of options to start scrolling wildly, listing AUX/SAT/IPOD/HD Radio. I have to release and then tap the arrow button to the input I want, release for 4 secs and viola the input starts.

4 (D-)The Sound Quality is on par with satellite radio, meaning excellent, especially when you are listening to HD channels that have a strong signal. However there are some catches to this statement. It seems the radio tunes to the local standard FM channel first, then if HD is present on the same frequency it switches over to HD. This can cause a slight stutter in audio with a noticeable change in quality of sound. PLUS there is a loss in synch of audio as most HD stations aren't in perfect synch with their analog output. If your radio is having problems tracking the HD signal then there is an annoying switch back and forth from standard FM to FM-HD. It appears in the form of constant stuttering in audio with a noticeable upgrade/downgrade in sound quality. The loss in audio synch as mentioned before is HIGHLY noticeable and may have to do with how the tuner selects which signal it will track. Strangely you may have a good signal with the HD tuner, but if the FM tuner sees a significantly stronger signal the unit will still swap back and forth. I find this issue UNBEARABLE and have gone the effort of installing a pass-through with switch for the antenna cable so that I can use the built in FM tuner rather than the HD tuner for certain stations that show this problem due to reception in my area. I have this issue with 2 of 6 radio stations I listen to in my area.

5 (C-)When switching to the HD tuner the display on my radio still reads that it is on XM satellite input. I can deal with that except that unless I am paying attention to how many times I have selected the input I won't know if I am on AM-HD or FM-HD. It can be a little distracting trying to select the channel while driving. Also, about 1 in 6 or 7 times when selecting the HD tuner the front panel control inputs from my radio do not get accepted by the HD tuner and I am forced to change to standard FM tuner and back to get the controls to respond. Annoying, but livable.

6 (A-)AUX input (I don't have an IPOD so I can't review that side), the unit (Peripheral PXAMG Universal iPod Adapter) that is required to make the HDRT work will ONLY allow you to have 2 of the 3 possible inputs at a time. Your options are: HDRT, AUX (mini stereo 3/8inch plus R/L RCA type), and IPOD. This is livable, but they should have been able to combine all the inputs into a single cable, or used a switch, or some other ingenuity.

7 (A+)AUX input sound quality is superb, if a little quiet. I had to turn up my MP3 player to be able to hear it well on the radio.

Click Here For Most Helpful Customer Reviews >>

The controls are a little strange but once the station is tuned it sounds excellent. Good range in metro area. Easy to install but must purchase the iSimple ISGM571 Gateway. Gateway connects to radio and HD radio tuner hides in the glove box of my 2013 Chevrolet Silverado. Picks up numerous HD stations. There is a delay but I typically listen to 3 main stations so it is not an issue.Watched a Youtube video on removing the radio and dash panels. Very simple. Less than an hour to install.

Best Deals for iSimple HDRT Peripheral HD Radio Tuner Add-On for PXAMG Interface

I had this installed in my 2010 Subaru Outback (not sure if it's this model; it's whichever model iSimple said would work with my car). Mobile One did this by attaching an antenna adapter to the factory antenna and then connecting to the SAT port in the factory stereo system, in accordance with the iSimple installation instructions. The system does not always recognize the HDRT. I have to turn the car off then back on again to wait for the system to recognize it. Once it does recognize it, the sound quality is tinny and sometimes has an intermittent signal. iSimple doesn't tell you that you can still have your factory radio work by using a Y-splitter. After my fourth trip to Mobile One to try to get this thing working, I was about to have them remove it and re-connect the factory radio, and forget about HD radio even though it means I won't receive my local NPR station's classical music on its HD2 channel. Just before giving up, I asked Mobile One if there were a way to have both connected. They tried a Y-splitter with an adapter and it worked. So even though the iSimple HDRT doesn't work well, I kept it to get the HD2 classical music on the occasions when the HDRT decides to work! and will use the factory radio for everything else. So this was an expensive way to get one radio station on an intermittent basis. I don't know if it's bad software or bad hardware, but either way, it does not work well, especially given the price plus installation charges.

Honest reviews on iSimple HDRT Peripheral HD Radio Tuner Add-On for PXAMG Interface

received this back in June the interface didn't work so i got that replaced after a while i finely got interface back now the hd radio don't work now they tell me its to late to get it replaced so here i sit on junk that don't work

Find helpful customer reviews and review ratings for iSimple HDRT Peripheral HD Radio Tuner Add-On for PXAMG Interface

I am using this unit with an ISSB571 in my 07 Subaru Outback. The HDRT tuner has poor reception. I live at the edge of town so the signal strength weak to begin with. I have another vehicle with a Kenwood HD radio tuner that picks up most of the HD stations with very little troubles. This unit is always switching between "HD" and a very static laden analog. It will only stay on HD for short periods of time. I have double checked the antenna connections. I did use an antenna "Y" adapter so I can still use the FM from the stock head unit. The Y may be degrading the signal strength some, but the stock FM works just fine in this configuration.

Husky Liners 99841 WeatherBeater Series Black Front and 2nd Seat Reviews

Customer Ratings:
List Price: $240.95
Sale Price: $151.95
Today's Bonus: 37% Off

These are delivered from HuskyLiners, so you can be sure you are receiving the right item.

I was able to order these for about $20 less than they are selling them for on their website great deal.

The liners fit like a glove, no spaces around the edges and tuck into all the right crevices. They give great coverage under the accelerator and foot rest, so that when you have wet feet the water does not soak into the carpet.

An all around great product, and with a lifetime warranty, you can't beat them.

Click Here For Most Helpful Customer Reviews >>

Ordered these floor liners after purchasing a 2014 Outback last week. The fit is perfect, more than perfect, as if Subaru had made them. In my previous vehicle (2011 Nissan Altima), I had purchased WeatherTech liners. I was mostly satisfied with them. Comparing these two liners, my opinion is that the Husky Liners are superior in construction and fit. If you have a 2014 Outback, these can't be beat.

Best Deals for Husky Liners 99841 WeatherBeater Series Black Front and 2nd Seat

Fit perfect good weight and do the job. Worthwhile purchase no surprises. And no worries about damaging the carpet now.

Honest reviews on Husky Liners 99841 WeatherBeater Series Black Front and 2nd Seat

Have had a set of these for the last three vehicles. So much easier to keep clean than the factory The fit is perfect!

Rugged Ridge 13214.09 Black/Grey Custom Neoprene Front Seat Cover Reviews

Customer Ratings:
List Price: $208.99
Sale Price: $149.23
Today's Bonus: 29% Off

One really has to wrestle to get the Rugged Ridge Front Seat Covers (13214.09) over the factory seats. Rugged Ridge actually points this fact out in their installation instructions. The problem exists in that the stitching between the panels does not accommodate the force necessary for a proper fit, or normal wear. The seat covers should be, at a minimum, double stitched, but they are not. Even if one gets the seat covers on without pulling the seams apart, I think the natural stretch of the tight-fitting neoprene and ones body movement will, over time,lead to seam failure. My wife turned the covers inside-out and restitched (3 times) the seams and installation went well and should hold for quite some time. This extra step will, I believe, save time and frustration of having to remove, sew and reinstall the seat covers when the inevitable failure occurs, even after moderate use.

Click Here For Most Helpful Customer Reviews >>

Love the look of the seat covers, although very hard to put on. Once i fought to get them on, I found out the headrests do not fit my jeep. Web site said they would fit a 2012 jeep. I am not going to go through the hassle of taking covers off to return them.

Best Deals for Rugged Ridge 13214.09 Black/Grey Custom Neoprene Front Seat Cover

I'd probably return these seats if I didn't get them at half off from the warehouse deals. Quality control and construction is lacking from what I could see, perhaps why the first person returned them to amazon? Anyway, there's stray stitching and string on all pieces, the ends aren't all finished very well either. While installing I pulled on the strap to connect the ends and it ripped through the seat with what I would consider an acceptable amount of force to pull the seat tight enough.

So now I have the seat covers installed but the head rest covers won't fit. I do have a 2012 and I guess the head rests have changed enough to not allow them to fit. I guess it would be nice if Rugged Ridge had a working website to indicate which products work on the 2011 + 2012s as it seems many of their products still list "07 and up" rather than the real limits. With the new model out for so long now I'd hope they could at least keep their customers happy by such a simple thing as validating and testing.

They look pretty decent but I don't think I'd say fits like it was re-upholstered... If you've got a 2011/2012 I'd avoid this one and try to find a brand that is designed properly and hopefully has better quality control. I'm likely to keep checking myself and maybe gift these to someone who has an older model that might fit properly.

Honest reviews on Rugged Ridge 13214.09 Black/Grey Custom Neoprene Front Seat Cover

The seat covers look better than factory seat. You have to work hard to get them in place very tight fit. Once you have them in place they fit like a glove.Very happy with the quality and the seats go well with the interior.They do add some cushioning and you will set a little higher. It is not enough to matter unless your head is touching the roof now.

Find helpful customer reviews and review ratings for Rugged Ridge 13214.09 Black/Grey Custom Neoprene Front Seat Cover

Installed on a '10 Wrangler 2 door. Covers fit very well and look good. Pulling the covers on was no big deal. Headrests fit well. Instructions say to pull the bottom edge of the cover through the gap between the seat back and the seat bottom. Instructions say this will be difficult. They should say it will be impossible on some seats. The original fabric under the back of my seats is a light pile where it wraps under the seat bottom. The velcro on the seat cover attaches itself firmly to this fuzz and you CANNOT push the cover through. Period. However.....put a piece of 6 mil plastic sheeting through the gap first and the velcro will slide right over the fuzz. It is tight and it will take a little push-pull with both hands but it goes right through. Pull the plastic out and use it on the other seat. I think the plastic sheet will make things easier even if the original material doesn't grab the velcro. I would have given the covers Five Stars except for this installation problem.

Discount Mercedes Benz Seat Belt Cover Shoulder Pad one pair

Customer Ratings:

I purchased these a week ago and I must say they give a finishing touch to my interior. Good quality,nice and soft padded and easy to install. Would recommend to another Benz owner.

Thanks amazon,

Chris

Click Here For Most Helpful Customer Reviews >>

I got these seatbelt covers for my Dad's birthday. He was absolutely thrilled. I believe the seller also sent air freshener. This is a great gift for the Benz lover in the family!

Best Deals for Mercedes Benz Seat Belt Cover Shoulder Pad one pair

These are very nice seat-belt pads. The material is soft, sturdy, and easy maintenance. The name also adds a touch more class to the interior of my Mercedes. You cannot go wrong with this set.

Honest reviews on Mercedes Benz Seat Belt Cover Shoulder Pad one pair

Seems to be good quality, the letters are

stitched, matches my black ML, I like it,

it's comfortable. Good price. 5 stars

Find helpful customer reviews and review ratings for Mercedes Benz Seat Belt Cover Shoulder Pad one pair

This product was about as cheap as you can get. Also, I ordered this based on the image the seller has on the product page, I did NOT get what is pictured. Horrible product.